1. When the mixer controls the steering wheel on the way

這是抖動，一般在攪拌車中速以上速度行進時，底盤有規律性的響聲，嚴峻時駕駛室和車門發抖，方向盤強烈震動，導致手發麻，這是方向傳動裝置動平衡被損壞了，攪拌車傳動軸及其花鍵軸和花鍵套磨損過度引起的。

This is shaking. Generally, when the mixer is moving at medium speed or above, the chassis makes regular noise. When it is severe, the cab and the door shake. The steering wheel vibrates strongly, resulting in hand numbness. This is caused by the damage of the dynamic balance of the direction transmission device and the excessive wear of the drive shaft, spline shaft and spline sleeve of the mixer.

2、攪拌車在轉向的時分沉重費力

2. The mixer is heavy and laborious when turning

這種現象產生的原因有：轉向系統各部位的滾動軸承及滑動軸承合作過緊，軸承光滑不良，轉向縱拉桿、橫拉桿的球頭調的過緊或許缺油，轉向軸及套管彎曲，造成卡滯，前輪前束調整不妥，前橋或許車架彎曲、變形，攪拌車的輪胎胎壓不足。

The reasons for this phenomenon are: the cooperation of rolling bearing and sliding bearing in all parts of the steering system is too tight, the bearing is smooth and poor, the ball joint of steering longitudinal rod and tie rod is too tight or lack of oil, the steering shaft and sleeve are bent, causing stagnation, the front toe in adjustment is not proper, the front axle or frame is bent and deformed, and the tire pressure of the mixer is insufficient.

3、攪拌車的方向盤欠好操縱

3. The steering wheel of the mixer is not easy to operate

在攪拌車的行進過程中，方向盤會主動的向道路一邊偏，造成這種現象的原因有幾個：兩邊的前輪規格不一致，兩邊的鋼板彈簧拱度或彈力不一致，左右兩邊軸距相差不均勻等。

In the process of the mixer's moving, the steering wheel will actively lean to one side of the road, which is caused by several reasons: the specifications of the front wheels on both sides are inconsistent, the camber or spring force of the leaf springs on both sides are inconsistent, and the wheelbase on the left and right sides are not uniform.

4.、攪拌車方向盤發飄

4. The direction of mixer truck is floating

造成這種現象的原因一般是行進中前輪擺頭，主要原因是：墊補輪胎或許修補輪胎造成前輪總成動平衡被損壞，攪拌車傳動軸總成有零件松動，攪拌車傳動軸總成平衡被損壞，減震失效，鋼板彈簧剛度不一致，攪拌車轉向系機件磨損松懈，前輪校準不妥。

The main reason for this phenomenon is that the front wheel swings its head in the process of moving. The main reason is that the dynamic balance of the front wheel assembly is damaged by patching the tire or repairing the tire. There are loose parts in the drive shaft assembly of the mixer, the balance of the drive shaft assembly of the mixer is damaged, the shock absorption is invalid, the spring rigidity of the steel plate is inconsistent, the steering system parts of the mixer are worn loosely, and the front wheel calibration is improper.