1、進行清洗、加油、加潤滑油脂等作業時的重要注意事項為防止在拌筒運轉時，發生卷入拌筒驅動部件(拌筒、托輪、驅動軸)及其他運轉部件的危險，當自動攪拌車發動機停止進行以下作業時，操作桿必須置于“停止”。并將發動機熄火。發動機鑰匙撥出后，一定由操作者攜帶，以免發生人身事故。

1. The important precautions for cleaning, oiling, lubricating grease and other operations are to prevent the danger of being involved in the driving parts (mixing drum, supporting wheel, driving shaft) and other operating parts of the mixing drum during the operation of the mixing drum. When the automatic mixing truck engine stops the following operations, the operating lever must be placed at "stop". Shut down the engine. After the engine key is removed, it must be carried by the operator to avoid personal accident.

⑴對粘附在進料斗，拌筒筒口，拌筒托輪，后車架，拌筒刮槳板口的混凝土進行沖洗及鏟除作業時。

(1) When washing and removing the concrete adhered to the feed hopper, mixing drum mouth, mixing drum supporting wheel, rear frame, and mixing drum scraper mouth.

⑵對拌筒、拌筒托輪、減速器、操作控制桿件、驅動軸等進行檢修，以及加油、加潤滑脂和換油時。

(2) The mixing drum, mixing drum supporting wheel, reducer, operating control rod, drive shaft, etc. shall be overhauled, and the oil shall be added, greased and changed.

⑶在平坦地帶作業時，請將車輪制動閘完全鎖定后再進行作業。

(3) When working in flat areas, please lock the wheel brake completely before operation.

2.進行自動攪拌車拌筒內混凝土等的鏟除作業時的重要注意事項在拌筒內進行鏟除等作業時，務請遵守以下事項。防止拌筒轉動的操作順序：

2. Important precautions during the removal of concrete in the mixing drum of the automatic mixer truck. Please observe the following items during the removal of concrete in the mixing drum. Operation sequence to prevent mixing drum from rotating:

①后部操作手柄確實置于空檔位置。

① The rear joystick is indeed in the neutral position.

②停止發動機。

② Stop the engine.

③拔出發動機的鑰匙，由操作人員攜帶保管。

③ The key of the engine shall be taken out and kept by the operator.

攪拌筒內外積污及殘存的混凝土渣塊時，以及在機修人員進入筒內進攪拌行自動上料攪拌車在工作時應注意什么檢修和焊補作業時，需先關閉汽車發動機，使攪拌筒完全停止轉動。

When removing the dirt and residual concrete slag inside and outside the mixing drum, and when the mechanical maintenance personnel enter the mixing line into the drum, the automatic loading mixer truck should pay attention to what maintenance and welding repair work should be done, the car engine should be turned off first to make the mixing drum completely stop rotating.

在機修人員進入筒內工作期間，要保證拌筒內通風良好，空氣新鮮，無可然氣體及有害灰塵，氧氣供應充足。在筒內使用電動工具操作時，操作人員要有良好的絕緣保護。更多相關注意事項就來我們網站http://f3328.cn咨詢吧！

During the period when the machine maintenance personnel enter the mixing drum for work, ensure that the mixing drum is well ventilated, fresh air, free of natural gas and harmful dust, and sufficient oxygen supply. When using electric tools in the cylinder, the operator should have good insulation protection. For more safety precautions, please visit our website http://f3328.cn Ask!