正所謂量體裁衣,對水泥攪拌車的衣服就是車框架。如果衣服裁的不合理,對于車不僅僅就是不好看那么簡單了,它的性也就大大下降。輪距和車框架的搭配也是非常重要的。因為上面我們就說車框架是在輪胎之上的。那么合理的輪距承載多大的車框架,必須在合理承受范圍之內。
It is the so-called tailor-made clothes. The clothes of the cement mixer are the car frame. If the clothes are cut unreasonably, the car is not only ugly, but also its safety will be greatly reduced. The matching of track width and car frame is also very important. Because we said above that the car frame is on the tire. Then the reasonable wheel base bearing the vehicle frame must be within the reasonable bearing range.
從而我們也知道,一個攪拌車的環境適應能力,不僅僅受到發動機的影響,還受到輪距的影響,那么我們自然而然知道小型攪拌車輪距的選擇有就非常重要了。我們都知道車的框架是在輪胎之上的,而正因此與地面接觸的就是輪胎。那么也就是說判斷一個道路是否能過,主要就是看自己的輪距是否在這個道路寬度之內。
Therefore, we also know that the adaptability of a mixer truck to the environment is not only affected by the engine, but also by the track width, so we naturally know that the choice of track width of small mixer truck is very important. We all know that the frame of the car is on the tire, and therefore it is the tire that contacts the ground. That is to say, to judge whether a road can be crossed, we mainly depend on whether our wheel base is within the width of the road.
此外攪拌車的機械密封組裝和拆卸應該在非常干凈的環境中進行,使用的潤滑油也應該高質量且純凈的,在進行全方面清潔保養中時,我們要如何做呢?應該先將機械密封區域的各個部位清洗干凈。接著再將兩端密封靜環裝置均勻且平穩的壓倒定位孔當中,要注意保護好靜環密封面,不能造成密封面磨傷或損壞,還有要利用導向套將多功能攪拌機的動環正確的安裝到軸上,在合上油室端蓋。
In addition, the mechanical seal assembly and disassembly of the mixer truck should be carried out in a very clean environment, and the lubricating oil used should also be high-quality and pure. What should we do in all aspects of cleaning and maintenance? All parts of the mechanical seal area should be cleaned first. Then press the sealing static ring device at both ends evenly and stably into the positioning hole. Pay attention to protect the sealing surface of the static ring, so as not to cause abrasion or damage to the sealing surface. In addition, use the guide sleeve to correctly install the moving ring of the multi-function mixer on the shaft, and close the end cover of the oil chamber.
這期間要注意不能碰撞到機械的密封面,如果要對攪拌機進行機械密封的拆卸,可以按照上面的順序反復進行,如果要更換多功能攪拌機的潤滑脂。
During this period, pay attention not to collide with the mechanical sealing surface. If you want to disassemble the mechanical seal of the mixer, you can repeat the above sequence. If you want to replace the lubricating grease of the multi-function mixer.
攪拌車的潤滑油的黏度過低,其潤滑效果也會隨之降低,部件也會產生摩擦力,隨之使其溫度升高,尤其是夏季會格外偏高,具體要增加了攪拌車零部件運行時的摩擦力,減速器運行時要克服摩擦力做功,也將產生很大一部分熱量,使減速器溫度升高。夏季的高溫是造成攪拌機減速器溫度上升的外部因素。夏季本身氣溫過高,混凝土攪拌站特殊的工作環境必然會造成設備的溫度過高。
If the viscosity of the lubricating oil of the mixer truck is too low, its lubrication effect will be reduced, and the components will also produce friction, which will increase its temperature, especially in summer. Specifically, the friction of the parts of the mixer truck will be increased. When the reducer is running, it will overcome the friction to do work, which will also produce a large part of heat, which will increase the temperature of the reducer. The high temperature in summer is the external factor causing the temperature rise of mixer reducer. The temperature in summer is too high, and the special working environment of the concrete mixing plant will inevitably cause the temperature of the equipment to be too high.
自上料水泥攪拌車在生產過程中如果潤滑油的黏度過高,這時候攪拌車軸承負荷增大,摩擦加劇,產生大量熱量,油的黏度過高,流動性差,導致運行負荷增大,將產生很大一部分熱量,使減速器溫度升高。
If the viscosity of the lubricating oil of the self loading cement mixer is too high in the production process, the bearing load of the mixer increases, the friction intensifies, and a lot of heat is generated. The viscosity of the oil is too high and the fluidity is poor, resulting in the increase of the operating load, which will generate a large part of heat and raise the temperature of the reducer.
以上就是問題解答的相關內容了,希望能夠幫助到大家,如對這一問題還存在任何疑問,都歡迎關注我們網站
http://f3328.cn并咨詢我們的工作人員,將竭誠為您服務。
The above is the relevant content of the question answer. I hope it can help you. If you still have any questions about this problem, you are welcome to follow our website http://f3328.cn And consult our staff, will serve you wholeheartedly.
上一篇:攪拌車不要過度熱車及熄火后使用電器設備
下一篇:自上料水泥攪拌車的動力系統分析