水泥自動攪拌車皮帶零件對于正泰設備而言是起到了很重要的作用,如果皮帶零件松動一類的問題出現就會對攪拌車的使用造成不好的影響,那么要怎么處理呢?
Cement automatic mixing car belt parts for Chint equipment is to play a very important role, if the belt parts loose problems will have a bad impact on the use of mixing car, so how to deal with it?
水泥自動攪拌車是混凝土攪拌站的核心部分,它的能否正常工作用轉是混凝土攪拌站能否正常工作的決定部分。所以攪拌站主機的維護和保養關重要。下面我們就來說說,水泥自動攪拌車皮帶松動零部件松動的處理方法。
Cement automatic mixing truck is the core of concrete mixing station, its normal work is the concrete mixing station can work properly to determine the part. So the maintenance and maintenance of the mixing station host is very important. Here we say, cement automatic mixing car belt loose loose parts of the processing method.
水泥自動攪拌車電機傳動皮帶過松的情況,只需停機后調整水泥自動攪拌車電機傳動皮帶的張緊度即可。此外水泥自動攪拌車超載而造成攪拌軸停轉,只需調整進料量,卸出多余的物料,降低攪拌軸轉動負荷即可。
If the motor drive belt of cement automatic mixer car is too loose, only the tension of the motor drive belt of cement automatic mixer car can be adjusted after shutdown. In addition, the cement automatic mixer is overloaded and causes the mixing shaft to stop, so it only needs to adjust the feed amount, discharge the excess material and reduce the rotating load of the mixing shaft.
側葉片與關內壁卡滯物料時,在攪拌軸停轉前往往會有尖銳刺耳的摩擦聲,出現這種情況時,需立即停機檢查,人工排除異物,重新調整水泥自動攪拌車攪拌葉片或側葉片與罐內壁間的間隙,有必要時可以用水先清洗下。
When the side blade and the inner wall stuck material, there will often be sharp and harsh friction sound before the mixing shaft stops. In this case, it is necessary to stop the machine immediately for inspection, manually remove foreign bodies, and re-adjust the gap between the cement automatic mixer blade or the side blade and the inner wall of the tank. If necessary, it can be cleaned with water first.
現實使用中,導致
水泥自動攪拌車出現零件松動的原因有很多,但是在保證使用質量的前提下,我們需要及時進行維修處理,同時還要規范我們的操作使用,并定期進行維護檢查,從而降低水泥自動攪拌車的使用風險。
In practical use, there are many reasons for the loose parts of the cement automatic mixer, but on the premise of ensuring the quality of use, we need to carry out timely maintenance treatment, but also standardize our operation and use, and regularly carry out maintenance inspection, so as to reduce the use risk of the cement automatic mixer.
如果大家在使用水泥自動攪拌車的過程中出現故障的話一定要及時的才行,特別是類似皮帶零件松動這種問題時才是需要及時的。更多內容就來網站
f3328.cn進行咨詢吧!
If you use cement automatic mixing car in the process of failure, it must be timely solved, especially similar to the belt parts loose this problem is the need to solve in time. For more information, please visit f3328.cn for consultation!
上一篇:自動攪拌車駕駛員要懂得怎樣的操作事項?
下一篇:水泥自動攪拌車的攪拌主機“抱軸”如何處理?