1. The automatic feeding mixer will clean the fuel system regularly and control the generation of carbon deposition to keep the engine in the best condition.

2.攪拌車使用適當質量等級的油。對于汽油發動機，應根據進氣和排氣系統的附加設備和運行條件選擇SD-SF級汽油發動機機油；柴油機應根據機械負荷使用CB-CD級柴油機油。選擇規格基于不少于制造商的規定。

2. Use oil of appropriate quality grade for mixer truck. For gasoline engine, sd-sf gasoline engine oil should be selected according to additional equipment and operating conditions of intake and exhaust system; cb-cd diesel engine oil should be used for diesel engine according to mechanical load. The selection of specifications is based on not less than the manufacturer's specifications.

3.自動攪拌車將定期更換機油和濾芯。在任何質量等級的操作過程中，油質都會發生變化。為防止問題的發生，應根據使用條件定期更換機油，并且機油量應適中（通常是油垢的上限）。

3. The oil and filter element of the automatic feeding mixer will be changed regularly. The quality of the oil changes during operation at any quality level. In order to prevent problems, the oil should be changed regularly according to the service conditions, and the oil quantity should be moderate (usually the upper limit of oil dirt).

4.自動攪拌車堅持曲軸箱的良好通風。

4. Adhere to good ventilation of crankcase for automatic feeding mixer.

5.自動攪拌車的保養三種濾清器：三種濾清器是指空氣濾清器，機油濾清器和燃油濾清器，當今的大多數汽油發動機都裝有PCV氣門（曲軸箱強制通風），但氦氣中的污染物會沉積在PCV氣門周圍，可能會阻塞閥門。因此，必須定期PCV閥周圍的污染物。

5. There are three kinds of filters for the maintenance of automatic feeding mixer: air filter, oil filter and fuel filter. Most gasoline engines today are equipped with PCV valve (forced crankcase ventilation), but pollutants in helium will deposit around the PCV valve, which may block the valve. Therefore, the contamination around the PCV valve must be removed regularly.

6.自動攪拌車定期清潔曲軸箱。

6. Clean the crankcase of the automatic feeding mixer regularly.

在發動機運轉過程中，焚化室內的高壓未燃燒氣體，酸，濕氣，硫和氮氧化物會通過活塞環和氣缸壁之間的間隙進入曲軸箱，并與通過燃燒產生的金屬粉末混合。零件的磨損污泥。因此，應定期清潔曲軸箱，以保持發動機內部清潔。

During engine operation, high pressure unburned gases, acid, moisture, sulfur and nitrogen oxides in the incineration chamber enter the crankcase through the gap between the piston ring and cylinder wall and mix with the metal powder produced by combustion. Wear sludge of parts. Therefore, the crankcase should be cleaned regularly to keep the engine interior clean.

7.自動攪拌車的發動機油箱生銹和結垢是更常見的問題。鐵銹和水垢會限制冷卻液在冷卻系統中的活動，降低散熱效果，導致發動機過熱，甚損壞發動機。因此，必須定期清潔水箱，以去除水箱之間的銹蝕和水垢。

7. Rust and scaling are the most common problems in the engine oil tank of the automatic feeding mixer. Rust and scale will limit the coolant activity in the cooling system, reduce the heat dissipation effect, cause the engine overheating, and even damage the engine. Therefore, the water tank must be cleaned regularly to remove rust and scale between the tanks.