水泥自動攪拌車在使用過程中防抱死系統出現故障,從而影響攪拌車的正常工作.為了盡快故障,必須先找出故障的原因,一般出現原因的點在于下面這些:
In order to solve the problem as soon as possible, we must first find out the cause of the failure. Generally, the reasons are as follows:
一、檢查水泥自動攪拌車的駐車制動是否完全釋放。
1、 Check whether the parking brake of concrete mixer is released completely.
二、檢查制動儲液罐液面是否符合說明書的規定。
2、 Check whether the liquid level of the brake reservoir meets the requirements of the manual.
三、檢查所有的制動管路有無損壞變形和泄漏跡象。
3、 Check all brake lines for damage, deformation and leakage.
四、檢查防抱死系統的所有熔斷絲是否完好,導線是否破損,插座是否牢固。
4、 Check whether all fuses of anti lock system are in good condition, whether the wires are damaged and whether the sockets are firm.
五、檢查蓄電池容量和電壓是否符合規定,正負極導線的連接是否可靠。
5、 Check whether the capacity and voltage of the battery meet the requirements, and whether the positive and negative wires are reliably connected.
六、檢查防抱死系統、ECI_I插接器連接是否牢靠。
6、 Check anti lock system and ECI_ I. whether the connector is firmly connected.
七、檢查電路連接處是否腐蝕、損壞、松脫或接觸不良,ABS的各搭鐵線搭鐵是否可靠。
7、 Check whether the circuit connection is corroded, damaged, loose or in poor contact, and whether the grounding wires of ABS are reliable.
八、檢查輪胎是否符合要求。
8、 Check whether the tire meets the requirements.
九、檢查水泥自動攪拌車的車輪轉動有無阻滯,輪轂軸承間隙是否正常。
9、 Check whether the wheel rotation of concrete mixer is blocked and whether the hub bearing clearance is normal.
此文是由中
科自上料攪拌車今天為您提供的精彩內容,更多的精彩內容請點擊進入網站
http://f3328.cn進行查看,更多的精彩內容可點擊相關的頁面查看.
This article is a wonderful content provided by Zhongke self feeding mixer for you today. For more wonderful content, please click to enter the website http://f3328.cn To view, more wonderful content can click on the relevant page to view
上一篇:小型攪拌車殘?jiān)趺催M(jìn)行處理?
下一篇:小型攪拌機使用禁忌,注意事項