冬天剛剛過去，因為疫情原因很多行業都受到了影響，雖然春天到了，但是更近寒潮的影響導致溫度還是比較低的，的小編就再簡單的補充說明一下冬天操作和使用水泥自上料攪拌車的時候應該和可以避免的問題，具體來看下吧：

　　This past winter, because the causes many industries have been affected, though spring is coming, but recently the cold cause temperature is low, the influence of CST together small make up of the peak is then simply added up in operation and use of the feeding mixer winter should and can avoid the problem, the specific look at:

　　冬期施工時，應切實做到：開機前檢查是否結冰;下班時認真排除拌筒內及供水系統內殘存積水，關閉水泵開關，將控制手柄置于“停止”位置。  每天工作結束后，司機應負責向攪拌筒內注入清水并高速(14—18轉/分)旋轉5—10分鐘，然后將水排去，以保證筒內清潔。用高壓水清洗攪拌筒各個部分時，應注意避開儀表及操縱桿等部位。壓力水噴嘴與車身油漆表面間的距離不得小于40厘米。

　　During the winter construction, it should be done in practice: check whether there is ice before starting; Remove the remaining water in the mixing drum and the water supply system after work, close the pump switch, and place the control handle in the "stop" position. At the end of each day, the driver should be responsible for filling the mixing cylinder with fresh water and rotating it at a high speed (14-18 RPM) for 5-10 minutes, and then draining the water away to ensure that the cylinder is clean. When cleaning each part of the mixing drum with high pressure water, please keep away from the instrument and control lever. The distance between the pressure water nozzle and the paint surface of the body shall not be less than 40 cm.

　　工作時，不得將手伸入旋轉的攪拌筒內，嚴禁將手伸入主卸料溜槽和加長卸料溜槽的連接部位，以免發生事故。熟悉自上料攪拌車結構、工作原理、操作方法。

　　When working, do not extend your hand into the rotating mixing cylinder. Do not extend your hand into the connecting parts of the main discharging chute and the extended discharging chute to avoid accidents. Familiar with structure, working principle and operation method of self-feeding mixer.

　　主要生產0.5方到6.5方自上料攪拌車，ZL-910型ZL-940型裝載機、叉草機、叉木機等，有需要產品設備的可以通過網站或者電話聯系我們，http://f3328.cn歡迎前來選購。

　　Zhongkejufeng mainly produces 0.5 square to 6.5 square from feeding mixer, zl-910 to zl-940 loaders, forklifts, forklifts, etc., if you need the product equipment can contact us through the website or telephone, http://f3328.cn welcome to buy.