It is a very common phenomenon that the mixer is blocked, which directly affects the working efficiency of the mixer. Next, let's learn how to avoid the blocking of the self feeding mixer of Sinochem.

　　一、裝卸時間參數不合理。

　　1、 Loading and unloading time parameters are unreasonable.

　　由于進料攪拌機不能添加到料位機料斗中，所以基本時間控制。如何設置時間參數,裝卸時間設定實際上是非常簡單的,在次使用,設置一個小時間,然后根據每個吸位置緩慢增加,當物質層面上達到吸入口,減去第二個是一個合理的時間。喂食時間是確保在一秒內喂食完畢。這樣做有兩個好處:一是材料水平太高，對濾芯的損壞特別大，我們有些客戶使用一個濾芯可能兩年或半年就是原因。

　　Because the feed mixer cannot be added to the hopper of the level machine, the basic time control. How to set the time parameter, the setting of loading and unloading time is actually very simple. In the first use, first set a small time, and then slowly increase according to each suction position. When the material level reaches the suction port, subtracting the second is a reasonable time. The feeding time is to ensure that the feeding is completed within one second. There are two advantages: first, the material level is too high, which causes great damage to the filter element. Some of our customers may use a filter element for two or six years.

　　第二、每次將物料放干凈后，進料閥在關閉時不會出現隨物料一起關閉閥門，隨物料一起關閉閥門每分鐘開關五到六次，這種頻繁工作對密封圈的損壞特別大。

　　Second, after each time the material is put away, the feeding valve will not close with the material when it is closed. The valve will be closed with the material five to six times a minute, which causes great damage to the sealing ring.

　　以上是中科自上料攪拌車廠家為大家介紹的相關內容，想要了解更多內容，歡迎訪問網站：http://f3328.cnThe above is the relevant content introduced for you by the manufacturer of feeding mixer of China Science and Technology Corporation. For more information, please visit the website: http://f3328.cn