自動攪拌車的進料口通常位于車身的頂部位置,用于裝載混凝土和水泥等原材料,通常采用液壓升降裝置來控制進料斗的開合和高低位置。
The feeding port of an automatic mixer truck is usually located in the center of the top of the vehicle body, used to load raw materials such as concrete and cement. Hydraulic lifting devices are usually used to control the opening and closing of the feeding hopper, as well as the high and low positions.
進料口通常配有防塵罩或者帶有過濾裝置的罩子,以防止灰塵和雜物進入車內,保證混凝土的質量。
The feed inlet is usually equipped with a dust cover or a cover with a filtering device to prevent dust and debris from entering the vehicle and ensure the quality of the concrete.
自動攪拌車的出料口通常位于車身后部,通常采用液壓卸料裝置來控制混凝土的卸料。出料口的位置和形式可以有所不同,有些自動攪拌車的出料口是直接向下排放,有些是向后傾斜的,以便于將混凝土卸載到需要的地方。
The discharge port of an automatic mixer truck is usually located at the rear of the vehicle body, and a hydraulic discharge device is usually used to control the discharge of concrete. The position and form of the discharge outlet can vary, with some automatic mixer trucks discharging directly downwards and others tilting backwards to facilitate unloading of concrete to the desired location.
同時,出料口的高度也可以根據需要進行調節,以便于直接卸載混凝土到施工位置。
At the same time, the height of the discharge outlet can also be adjusted as needed to facilitate direct unloading of concrete to the construction location.
需要注意的是,在進料和出料的過程中,應該確?;炷淋囕v的穩定性和性,避免因?yàn)椴僮鞑划?dāng)或者載重過量等原因造成車輛的傾覆或者損壞,同時應該確保卸料位置的性,避免影響周圍的行人和交通。有什么問題就來我們網站
http://f3328.cn咨詢吧!
It should be noted that during the process of feeding and discharging, the stability and safety of concrete vehicles should be ensured to avoid overturning or damage caused by improper operation or excessive load. At the same time, the safety of the unloading location should be ensured to avoid affecting pedestrians and traffic around. If you have any questions, come to our website http://f3328.cn Consult!
上一篇:自動攪拌車難題——冬季打火困難
下一篇:水泥自動攪拌車油耗增加的原因以及降低方案