水泥自動攪拌車在日常使用的過程中，避免不了會出現一些故障，很多的司機不知道怎么處理，尤其是新手司機遇到車輛出故障會有點手足無措，今天分享一些水泥自動攪拌車常見故障的辦法：

In the process of daily use of cement automatic mixer, some failures can't be avoided. Many drivers don't know how to deal with them. Especially novice drivers will be a little confused when encountering vehicle failures. Today, we share some solutions to common failures of cement automatic mixer:

1.水泥自動攪拌車為什么行駛過程中沒勁？

1. Why does the automatic cement mixer truck have no energy during driving?

答：這可能是攪拌車的排氣制動打開了，把排氣制動關閉就可以了。

Answer: This may be because the exhaust brake of the mixer is turned on. Just turn off the exhaust brake.

2.攪拌車的尿素不燃燒是什么問題？

2. What is the problem that the urea in the mixer does not burn?

答：這一般是因?yàn)閿嚢柢嚨哪蛩刂杏须s質，在燃燒后把排氣管過濾網堵塞了，更換或清洗排氣管過濾網就可以了。

Answer: This is generally because there are impurities in the urea of the mixing truck, and the exhaust pipe filter screen is blocked after combustion. Replace or clean the exhaust pipe filter screen.

3.攪拌車在拉料的過程中，將車倒上坡，為什么卸不出料來？

3. Why can't the mixer truck unload the material when it reverses the truck to the slope?

答：這是因?yàn)閿嚢柢囋诘管嚿掀碌倪^(guò)程中，混凝土?xí)逊e在攪拌罐的封頭位置，重在攪拌罐的前面，這時混凝土分布不均，導致減速機轉不動，出現不卸料的情況。

Answer: This is because when the mixer is backing up the slope, the concrete will be piled up at the head of the mixing tank, and the weight will be in front of the mixing tank. At this time, the concrete will be unevenly distributed, resulting in the gear reducer will not move and there will be no unloading.

4.新買的攪拌車行駛途中突然熄火是怎么回事？

4. What happened to the sudden flameout of the newly purchased mixing truck during driving?

答：這個情況可能是新攪拌車的油箱進入了空氣，因?yàn)樾沦I的攪拌車油箱的油一開始不多，在加油的過程中很可能進了空氣，只需要多按幾下排氣閥就行了，還不行的話，就要松動供油嘴的螺帽，把大量氣體排出即可，這樣做可能會有少量柴油流出，有些小損耗。

A: This may be because the fuel tank of the new mixing truck enters into the air, because the fuel tank of the new mixing truck is not much at the beginning, and it is likely to enter into the air during the refueling process. Just press the exhaust valve a few times. If it is not enough, loosen the nut of the fuel supply nozzle and exhaust a large amount of gas. This may cause a small amount of diesel to flow out, and some small losses.

5.新購買的水泥自動攪拌車在行駛過程中，駕駛室儀表盤上會顯示工具“扳手”的圖樣是怎么回事？

5. When the newly-purchased cement automatic mixer is driving, what is the drawing of the tool "wrench" displayed on the dashboard in the cab?

答：這個情況是告訴我們，攪拌車該保養了。

A: This tells us that the mixer needs to be serviced.

6.攪拌車駕駛室儀表盤上顯示“故障燈”亮是怎么回事？

6. What is the reason that the "fault light" on the dashboard in the cab of the mixer is on?

答：當攪拌車出現這種情況也不要擔心，這可能是因?yàn)槟膼?ài)車加的油號與上次加的不一致，還可能是因?yàn)榧拥哪蛩嘏c上次的不是同一企業，這些都可能會導致“故障燈”亮的，可以到就近的服務站去進行電腦檢測消掉。

Answer: Don't worry when this happens to the mixer. It may be because the fuel number of your car is not the same as that of the last time. It may also be because the urea added is not the same brand as that of the last time. These may cause the "fault light" to light up. You can go to the nearest service station for computer detection and elimination.

7.水泥自動攪拌車的托輪發熱是為什么？

7. Why is the supporting wheel of the cement automatic mixer hot?

答：這是因?yàn)橥休喸摯螯S油了，檢查軌道是否有氣泡，軌道是否變形等等。

Answer: This is because it is time to grease the supporting roller. Check whether there are bubbles in the track and whether the track is deformed.

8.攪拌車的散熱器發熱是怎么回事？

8. What is the heat of the radiator of the mixer?

答：這一般是要換液壓油或散熱器濾芯。

Answer: This usually involves changing the hydraulic oil or radiator filter element.

水泥自動攪拌車常見故障的辦法就是以上講解的了，您對此有怎樣的疑惑或者需求就來我們網站http://f3328.cn咨詢吧！

The solutions to common failures of automatic cement mixer are explained above. If you have any doubts or needs about this, please come to our website http://f3328.cn Ask!