無論什么設備使用一段時間，都必須進行養護。養護工作的質量會影響設備的壽命和生產效率。自動攪拌車也不例外，下面小編就簡單介紹一下自動攪拌車的相關養護方法。

No matter what equipment is used for a period of time, it must be cured. The quality of maintenance work will affect the service life and production efficiency of equipment. Automatic mixer truck is no exception. The following small series will briefly introduce the relevant maintenance methods of automatic mixer truck.

檢查各潤滑點的潤滑油是否充足，以保證氣路系統中的潤滑器保持充足的油量；

Check whether the lubricating oil at each lubricating point is sufficient to ensure that the lubricator in the air circuit system maintains sufficient oil;

檢查電機電器是否過熱，有無噪音，檢查儀表指示是否正常，信號系統是否良好；

Check whether the motor and electric appliance are overheated and noisy, whether the instrument indication is normal and whether the signal system is in good condition;

保持周圍環境整潔；

Keep the surrounding environment clean and tidy;

定期檢查調整氣缸電磁閥蝶閥的啟閉是否符合要求；

Regularly check and adjust whether the opening and closing of the cylinder solenoid valve butterfly valve meet the requirements;

檢查自動攪拌車各系統是否有漏氣漏油漏電漏灰等現象。如出現此類現象，需及時處理；

Check whether each system of the automatic mixer has air leakage, oil leakage, electric leakage, ash leakage, etc. In case of such phenomenon, it shall be handled in time;

在使用過程中，自動攪拌車的攪拌機和出料斗應每4小時清洗一次，以免殘留固結，影響設備的正常使用；

During use, the mixer and discharge hopper of the automatic mixer shall be cleaned every 4 hours to avoid residual consolidation and affect the normal use of the equipment;

每次運行后，將過濾器儲氣罐空壓機內的水排掉，對運行中的故障一一排除。

After each operation, drain the water in the air compressor of the filter air storage tank and eliminate the faults one by one.

自動攪拌車使用后，必須立即攪拌機和加料機內的殘留物料，使傳感設備歸零；

After the automatic mixer is used, the residual materials in the mixer and feeder must be removed immediately to make the sensing equipment return to zero;

設備運行一段時間后，需要檢查各個潤滑點，看是否需要添加；

After the equipment operates for a period of time, it is necessary to check each lubrication point to see whether it needs to be added;

定期空轉設備，檢查電機減速電機等部件是否有過熱異響等現象；

Regularly idle the equipment, and check whether the motor reducer motor and other components have overheating, abnormal noise and other phenomena;

完成生產工作后，需要對周圍環境進行清理；

After the completion of production, the surrounding environment needs to be cleaned;

不定期檢查各系統，檢查是否有漏灰漏氣漏油等現象，必要時立即處理；

Inspect each system irregularly to check whether there is ash leakage, air leakage, oil leakage and other phenomena, and deal with them immediately if necessary;

在自動攪拌車的卸料口，應經常清理殘留物，以免妨礙設備的正常運行；

At the discharge port of the automatic mixer, the residues shall be cleaned frequently to avoid hindering the normal operation of the equipment;

每項工作完成后，需對空壓機儲氣罐過濾器內部的水進行清洗，排除運行中的故障；

After the completion of each work, the water inside the filter of the air compressor air storage tank shall be cleaned to eliminate the faults during operation;

按規范定期對設備中的攪拌器氣動蝶閥裝置空氣過濾器等裝置進行維護保養；

Regularly maintain the agitator, pneumatic butterfly valve, air filter and other devices in the equipment according to the specifications;

每次氣動操作前，設備應空轉，檢查攪拌筒或攪拌葉片的轉動方向，各工作裝置的運轉及制動情況，確認正常后再投料生產；

Before each pneumatic operation, the equipment shall be idled. Check the rotation direction of the mixing drum or mixing blade, the operation and braking of each working device, and put into production after confirming that it is normal;

嚴格執行上述檢查項目，保證自動攪拌車設備運行效率和操作人員。

Strictly implement the above inspection items to ensure the operation efficiency of automatic mixer truck equipment and the safety of operators.

以上就是問題解答的相關內容了，希望能夠幫助到大家，如對這一問題還存在任何疑問，都歡迎關注我們網站http://f3328.cn并咨詢我們的工作人員，將竭誠為您服務。

The above is the relevant content of the question answer. I hope it can help you. If you still have any questions about this problem, you are welcome to follow our website http://f3328.cn And consult our staff, will serve you wholeheartedly.