水泥自動攪拌車堵料預防的方法:
Methods for preventing blocking of cement automatic mixer:
1、上下料時間不合理:水泥自動攪拌車因料倉內無法加裝料位機,所以基本都有時間控制。如何設置時間參數,上下料時間設置還是比較簡單的,在初次使用時,先設置一個比較短的時間,然后根據每次吸料位置慢慢加,當達到料位達到吸料口的時間,再減去一秒就是合理時間。放料時間是確保放完料再加一秒。這樣做的目的有兩個好處:一是料位太高對濾芯傷害特別大;二是每次料都能放干凈。
1. Unreasonable loading and unloading time: the automatic cement mixer basically has time control because it is unable to install a material level machine in the silo. How to set the time parameters? The setting of loading and unloading time is still relatively simple. In the initial use, set a relatively short time first, and then slowly add it according to each suction position. When the time to reach the material level and reach the suction port is subtracted by one second, it is a reasonable time. The discharging time is to ensure that one second is added after discharging. The purpose of doing so has two advantages: first, too high material level will cause great damage to the filter element; Second, the material can be put clean every time.
2、水泥自動攪拌車進料口給料量是否合理:正確的方式是物料在吸料口和空氣形成一定的氣物混合比,在氣流推動下均勻流入上料機。這個時候我們需要將料倉設計帶有補氣功能。如果物料積壓時間過長可能會很硬,這個時候需要在料倉上裝一個振蕩器,敲碎結塊的物料。
2. Whether the feeding amount at the feed inlet of the automatic cement mixer is reasonable: the correct way is that the materials form a certain gas-solid mixture ratio between the suction inlet and the air, and flow evenly into the feeder under the push of the air flow. At this time, we need to design the silo with air replenishment function. If the material backlog time is too long, it may be very hard. At this time, an oscillator needs to be installed on the silo to break the caked materials.
以上是關于水泥自動攪拌車堵料的預防方法,希望對你能有所幫助!
The above is about the prevention method of blocking of cement automatic mixer truck. I hope it can be helpful to you!
上一篇:為什么水泥自動攪拌車冬季運輸耗油高?
下一篇:自動攪拌車安裝允許誤差但不允許錯誤!