1. Corrosion caused by environmental factors. The area with high relative humidity will accelerate the rusting of automatic mixer, especially when the temperature is just above freezing point. In humid areas, the automatic mixer should be kept as dry as possible to avoid local rusting and rusting. If the ventilation is poor, using high temperature to dry the full-automatic mixer, it is also easy to rust and rust the body of the full-automatic mixer.

2、有害物質的侵蝕。道路上產生的鹽堿、含化學物質的灰塵，都可加速全自動攪拌車生銹，特別是受到鹽堿、灰塵和水汽的污染侵蝕，會使全自動攪拌車車身部分銹蝕。在沿海一帶，空氣中含有鹽分、工業污染所形成的酸雨等有害化學物質也會加重對全自動攪拌車的腐蝕。而在北方嚴寒地區，為了使道路不易結冰，通常都會在道路上噴灑鹽水，而全自動攪拌車開過，也會對全自動攪拌車的車體等造成銹蝕。

2. The erosion of harmful substances. The salt, alkali and dust containing chemical substances produced on the road can accelerate the rust of the full-automatic mixer, especially the corrosion caused by the pollution of salt, alkali, dust and water vapor, which will rust the body of the full-automatic mixer. In the coastal area, the air contains salt, industrial pollution caused by acid rain and other harmful chemicals will also aggravate the corrosion of automatic mixer. In the northern cold area, in order to make the road not easy to freeze, salt water is usually sprayed on the road, and the car body of the full-automatic mixer will be rusted when the full-automatic mixer is driven.

3、機械損傷后的銹蝕。全自動攪拌車受到意外或石塊碰撞而劃傷表面油漆保護層，也會導致銹蝕。

3. Corrosion after mechanical damage. The automatic mixer is scratched by accident or stone collision, which can also lead to corrosion.

雨天，司機經常會碰到發動機不易啟動的毛病，有時即使勉強啟動起來，也是有氣無力的。這種毛病的可能是出自點火系統因潮濕而產生的漏電。此外，可能是一到下雨天氣變涼了，而封在分電盤內的熱空氣就有可能凝結成水滴而造成分電盤內部的小水災，因而喪失了正常的點火功能。

On rainy days, drivers often encounter the problem that the engine is not easy to start. Sometimes, even if they start it reluctantly, they are still powerless. This problem may be caused by the leakage of the ignition system due to moisture. In addition, it may be that when it rains and gets cooler, the hot air sealed in the distributor may condense into water droplets, causing a small flood inside the distributor, thus losing its normal ignition function.

一旦發現是因?yàn)辄c(diǎn)火系統的潮濕而造成點火不良、攪拌車發動機性能下降的話，先用干燥的紙巾或干布把分電盤內外及電線等擦干，然后用專用干燥劑噴罐將干燥劑噴在分電盤蓋、電瓶接頭、火花塞、高壓線及點火線圈等處，等一陣后就可啟動攪拌車發動機了。

Once it is found that poor ignition and poor performance of mixer engine are caused by damp ignition system, dry the inside and outside of distributor and wires with dry paper towel or dry cloth, and then spray desiccant on distributor cover, battery connector, spark plug, high voltage wire and ignition coil with special desiccant spray tank. After a while, the mixer engine can be started.